Address: Comprehensive Development Zone, Hengli Village, Hengli Town, Dongguan, Guangdong, China (Mainland)
FAX : 86-769-81086936
Introduction to the mold temperature machine
The use of mold temperature machine in the plastics industry is relatively common, the main role is: 1. Improve the molding efficiency of the product; 2. Reduce the production of defective products; 3. Improve the appearance of the product and suppress defects of the product; 4. Accelerate production schedule, reduce energy consumption and save energy. The application of mold temperature machine in the die-casting industry also has a lot of space, especially in the manufacture of magnesium alloy and aluminum alloy. Uneven or inappropriate mold temperature will lead to unstable casting size, and the casting deformation will be ejected during the production process. Defects such as heat pressure, adhesive mold, surface depression, shrinkage cavities and thermal bubbles. It also has an impact on the production cycle, such as filling time, cooling time and spraying time, which produce unstable variables. The life of the mold is also affected by the overheating and overheating, which causes hot cracking of the expensive steel and accelerates its aging. In modern factories, in response to market competition, manpower saving, quality improvement and cost reduction are urgent tasks. The use of mold temperature machine can reduce the preheating time of the mold, improve the surface quality of the finished product and fully automate the production. Increasing mold life is a necessary means of increasing productivity. The use of temperature control machines in other industries is an inevitable condition for the composition of equipment, and the name is different. In the temperature control of the PVC sheet roller, the oil heater is called the temperature control device in the extruder equipment, and the temperature control system or the temperature control machine in the rubber mixer equipment. These devices are basically one first. Rapid warming, then the process of insulation. In the rubber equipment, it is necessary to perform a cooling and cooling process for a long time.
Previous: No Information
Next: what is the mould heater
Subscribe now,you will receive monthly valuable information.Name : Email :
Tel : 86-769-81086963
E-mail : firstname.lastname@example.org
Fax : 86-769-81086936
Copyright 2014-2023 © DongGuan Naser Machinery Co., Ltd. All Right Reserved.
Comprehensive Development Zone, Hengli Village, Hengli Town, Dongguan, Guangdong, China (Mainland).