Address: Comprehensive Development Zone, Hengli Village, Hengli Town, Dongguan, Guangdong, China (Mainland)
FAX : 86-769-81086936
Industrial chiller is a kind of machine that used to produce cooling water which is lower than normal temperature.
Naser Machinery brings you quality and precise low noise water-cooled screw chiller not only as one of the best manufacturers but also one of the leading suppliers in China. With decades experience in exporting our quality products, we enjoy good reputation. You can easily wholesale our low noise water-cooled screw chiller made in China with our factory.
low noise water-cooled screw chiller
1. water-cooled chiller and air-cooled chiller. Water-cooles chiller cooled by water, using with cooling tower and water pump, the other cooled by fan, can be used independently.
2.Our compressor is imported from Italy,France and so on, being of high-quality built-in safe protection, with low noise, the electricity of province is durable.
3. Cooling capacity range: 9.8kw~189kw
4. Normal conditions: Chilled water inlet temperature is 20 degrees, outlet temperature is 15 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in 5-30 degress range according to customers’ request,and the lowest temperature can arrive -25 degress.
5. Stardard Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%,Can also be customized according to customers’request
6. The quantity of compressor can be one or two ,each compressor is independent refrigeration system. Each other run independently.when the one is working ,the other can be working or not.
7. The quantity of compressor can be 1 to 4 ,each compressor is independent refrigeration system. Each other run independently.when the one is working ,the other can be working or not.
8. Use PLC microcomputer control from France Schneider, both English and Chinese human-machine interface.
9. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year.
10. Our standard refrigerant is R22, but you can choose to use environmental refrigerant such as R407C , R134A or R507.
'Naser' NWS-15AC- Air cooled chiller
|Model||NWS-15AC||15HP Air Cooling Chiller|
|Rated Cooling capacity||KW||50.85|
|control type||Thermostatic expension valve outer balance type|
|Condenser||type||High effective copper tube covered aluminum fins|
|Evaporator||type||water tank with coil pipe type|
|water tank capacity||178L|
|Chilled water flow||m3/h||8.74|
|inlet/outlet pipe dia.||DN50|
|Built-in pump||2HP/1.5KW||water flow:15 M3/H, Head:20M|
|Safety device||Compressor overheating protection, overcurrent protection, high-low pressure protection, overtemperature protection, flow rate protection, phase sequence/phase error protection, exhaust overheating protection.|
Packaging & Shipping